What you need
Ladder(s)
Drill(s)
Measuring Tape
6-8 People (A mechanical lift is also recommended for this build)
Cardboard (to be placed under the brackets to not scratch your surface or the brackets)
LUMBER
When purchasing your lumber, always take a bracket with you to ensure a proper fit.
You can select whatever lumber suits your style and budget. It must be dry and straight.
Brackets use dressed lumber.
4”x4” (3.5”x3.5”) Bracket Cavity is 3.61”x3.61”
6”x6” (5.5”x5.5”) Bracket Cavity is 5.62”x5.62
SCREWS
Each bracket only requires 2 screws per each side/set of eight holes.
1-1/2” Pan Rob/Phil combo drive 304 S.S Wood screws with Black plastic head caps are included.
Insert screws in holes closest to the wood.
Hardware to secure to wood is included.
Additional screws are available for purchase.
Figure 1
SECTION 1: BUILDING THE TOP
Insert your lumber into the first side of the TRIO 30 Left and Right brackets.
Attach the lumber to the first angled TRIO 30.
Figure 2
Attach the PEAK TRIO 30 with the center lumber.
Add lumber to the opposite PEAK TRIO 30.
Figure 3
Insert each section into each other.
Secure bracket to lumber with provided screws.
SECTION 2: INSERTING THE POSTS
Insert your vertical posts on the first side.
Secure bracket to lumber with provided screws.
SECTION 3: COMPLETE
Insert your lumber into side 2 to complete your pergola.
Secure bracket to lumber with provided screws.
Anchor to your surface. Remember, anchoring hardware is NOT included as surfaces will vary from build to build.
A local building supply retailer will be a helpful resource.